Titanium Frameset Features

// Titanium frame and seatpost

Classic, clean lines and perfect welds by hand.

Premium 3Al-2.5V double butted titanium frame creates an amazingly sharp and lively ride, tracking beautifully through high-speed corners, smoothing out rough roads, and springing back in response to your every input.

A secure, dual bolt seat clamp keeps your saddle in place no matter how rough the road gets.

Independently tested to CPSC 1512 and ISO 4210 standards.

// Branded detailing

Subtle design cues throughout.

// Carbon fork

A 1 1/8" to 1 1/2" tapered headtube provides a solid platform while straight blades and sleeved internal cable routing make for a clean, integrated look.

Fender mounts at the bottom of the fork blades and behind the fork crown.

Independently tested to CPSC 1512 and ISO 4210 standards, with a single sample passing all tests without failure.

// BSA english threaded bottom bracket

Simplicity works. Accommodates Shimano 50/34 and SRAM 48/35 double chainrings, and up to a 44 tooth single chairing.

// Internal cable routing

Three ports keep things tidy while doors at the bottom of the downtube help snake cables through.

// Di2 compatible

Ports located on the seat tube and chainstay keep Di2 cables safe and sound inside.

// 3rd water bottle cage

Mounts under the down tube allow for extra water for those far out rides.

// Flat mount disc brakes

Secured with 12mm thru axles.

// Replaceable derailleur hanger

Because, you know, crashing.

// Short chainstays, big tires

422mm chainstays keep handing intuitive and playful, while allowing large tire clearance for confident off-road handling.

• Front - 700c x 42mm / 650b x 50mm
• Rear - 700c x 38mm / 650b x 48mm

Note that some larger tires may fit, but it is dependent on tread pattern and rim width.